Whether the hot water runs out halfway through the second shower or you want to plan a replacement before the old tank gives out, our team keeps your home's hot water steady and safe.
Homeowners across Taylor call Taylor Water Heater for water heater work that is thorough, sized properly for how many people live there, and explained in plain language before any work begins.
From tankless upgrades and tank replacements to annual flushing, our team handles it all with honest pricing and lasting results.
Old tank out and new heater in, sized right and usually done in a day.
Error codes, scale, and ignition faults on tankless units, diagnosed with real testing.
Whole-home and point-of-use tankless heaters, planned around how your household uses hot water.
Tank, tankless, and heat pump installs sized to how your household uses hot water.
Help for flooding tanks, discharging relief valves, and no hot water, with safety handled first.
Flush, inspect, test, and adjust, so your water heater keeps running longer.
Leaks traced to the true source, from valves and fittings to the tank itself, then fixed honestly.
Electric water heater repair and replacement, tested with a meter, not a guess.
Heat pump water heaters with the airflow, drain, and wiring done right.
Commercial tanks, tankless racks, recirculation, and mixing valves for local businesses.
Gas water heater service from pilot outages to full installs, done safely.
Homeowners across Taylor call us for quick repairs, honest answers, and upfront pricing.
Get Help: (734) 280-6312
A busy household runs through dozens of gallons of hot water every day, and a struggling water heater disrupts the whole routine, from morning showers to evening laundry. Left alone, a heavy layer of sediment or a weeping relief valve can turn a nuisance into real water damage. When something goes wrong, you need a team that shows up fast, pins down the fault accurately, and repairs it properly. That's exactly what Taylor Water Heater delivers.
From heating elements and thermostats to thermocouples, gas valves, and dip tubes, our team takes on every residential water heater repair with skill and care.
Good water heater service starts with knowing exactly what you're dealing with. Taylor Water Heater provides honest, upfront pricing for every home, handling everything from a failed heating element to a complete tank replacement. Every visit begins with a careful inspection of your water heater, including its age, capacity, fuel type, venting, and the condition of the tank and valves, followed by a clear recommendation and a written price before any work starts.
A lot of water heater failures give quiet warnings long before the tank quits. Keep an eye out for discolored or rusty hot water, a rumbling tank, hot water that smells like rotten eggs, or showers that go cold sooner than they used to. Behind those symptoms are usually heavy sediment, a spent anode rod, or a failing dip tube. A quick inspection at the first sign usually costs far less than cleaning up after a failed tank.
Do you know how old your water heater is? The date code on the label usually gives it away. Once a tank passes the 10-year mark, it's worth scheduling a replacement before the current one forces the issue. As a rough guide, a 40 to 50 gallon gas tank typically runs $1,400–$2,800 installed, and an electric tank typically runs $1,100–$2,400, depending on venting, code updates, and access. Our team will tell you plainly whether yours has years left or is running on borrowed time.
Annual FlushingRoutine maintenance is the most reliable way to keep hot water flowing year-round. Regular service prevents failures before they start, clears out sediment, and catches small faults while they're still inexpensive to fix. At Taylor Water Heater, every maintenance visit is built around your actual heater, covering a full tank flush, an anode rod inspection, a test of the temperature and pressure relief valve, a burner and flue check on gas units, element and thermostat testing on electric units, and a thermostat setting check.
Every maintenance plan we write is a little different. An older tank gets a closer look than a new one, a tankless unit on hard water calls for annual descaling to protect its heat exchanger clear, and a large family works the tank far harder than a couple does. We build each visit around your equipment and water, so every tune-up helps keep the unit efficient and protects the equipment you've already paid for.
Think of maintenance as a safeguard for equipment you've already paid for. Each visit helps keep the tank clear of sediment, the anode rod doing its job, and the relief valve ready to open, which lowers monthly energy bills while reducing wear on the burner or elements. For most families, the plan costs far less than an early replacement.
Sized for Your HouseholdAn undersized water heater runs out before everyone has showered, while an oversized one burns fuel keeping gallons you never use hot around the clock. Taylor Water Heater sizes every replacement and new installation to your actual household. For tank models, that means matching the first-hour rating to your busiest hour, not just copying the gallon size on the old tank. For tankless models, it means sizing the gallons per minute to the fixtures you run at once and how cold your incoming water gets in winter.
We walk you through the options for every home, especially growing families with rising hot water needs. A 40-gallon tank that served a couple rarely keeps up once kids are showering every morning, and a tankless water heater can deliver steady hot water so long as it's sized for the flow. If you're weighing tank against tankless, or gas against a heat pump model, our technician will lay out the honest trade-offs: upfront cost, operating cost, venting and gas line sizing, electrical service, and space, so you can pick what fits your home and budget.
Frequent FailuresHomes around Taylor run into a familiar set of water heater failures, and each one calls for a different fix. Taylor Water Heater handles them all: no hot water, water that only gets lukewarm, pilots that won't stay lit, electric tanks that trip the breaker, noisy tanks full of sediment, rusty or smelly water, leaking relief valves, and tankless units flashing error codes. Our technicians identify the exact fault and target the repair to the component that actually failed.
The right repair depends entirely on what actually failed. On electric tanks, that usually means an element or thermostat. On gas units, it's more often a thermocouple, flame sensor, or gas valve. Pressure problems are solved with an expansion tank plus a properly set pressure-reducing valve, and leaks at the drain valve or fittings get repaired before they spread. We also check the temperature setting, since water above 120°F can scald kids and older family members in seconds. A tank leaking from the steel itself can't be patched, and we'll tell you so. And if you ever smell gas near the heater, leave the house and call your gas utility right away.
An inspection today can spare you a flooded floor later. Call for an honest assessment.
Call (734) 280-6312 NowWater heater breakdowns never happen at a convenient time. They tend to hit during a holiday weekend or the week houseguests arrive, exactly when everyone at home needs hot water most. Our emergency water heater service gets a technician to your door quickly, with the tools and parts to find the fault and fix it on the spot. If the tank is past repair, we plan and install a properly sized replacement without a long wait.
Every visit comes with transparent, upfront pricing and no hidden fees, and our technicians focus on fixing the actual cause for lasting results. We're happy to walk you through exactly what we found, what we fixed, and how to keep your water heater healthy going forward.
Lasting ResultsLong-term reliability comes from finding out why a part failed, not simply replacing it. Taylor Water Heater looks at water pressure, venting, and how the heater was installed on every call, because those underlying issues are behind many repeat failures. We treat your home the way we'd treat a neighbor's, because around here, that's exactly what you are.
Our process is simple: a thorough inspection, a clear recommendation, professional repair or installation, and honest guidance on maintenance. We handle everything from start to finish, including permits when the job calls for them, so your family can count on dependable hot water every day. For year-round peace of mind, ask about our annual maintenance visits that keep the tank clean and the relief valve tested.
Our experienced technicians are ready to help with any water heater problem in Taylor and surrounding areas.
Call (734) 280-6312 Now